Vocal Isolator & Vocal Remover — Extract Vocals or Instrumental, Reduce Room Noise (No Upload)
Free online vocal isolator and vocal remover — extract the vocal or the instrumental, or reduce noise, in your browser with no upload. Record or upload in the header Controller, pick a mode, press Isolate vocal, compare on the pitch roadmap, then export with Download Isolated (MP3, WAV, OGG, or M4A) or Save Vocal as Take into slot A–D. The same run also gives the instrumental — the song with the vocal removed — to play, download, or use as a backing track.
Separation happens on your device, not a server
Separation and noise reduction run locally with WebAssembly and ONNX Runtime Web. The audio stays in your browser tab and is never sent to a server. A slow connection does not add queue time — only the one-time model download (about 30 MB) uses the network. Longer takes take longer to process, and the progress bar shows time left.
Hear an acapella-style vocal without a DAW
This won't replace iZotope RX or a paid stem service on a dense master. Separate vocal from mix estimates the lead vocal over drums, bass, or chords. Reduce room noise cleans steady hiss, hum, or fan noise on a dry recording — it does not remove music. Use it to practice pitch on a song fragment, check intonation on a noisy home recording, or preview what an isolated vocal might sound like before you invest in studio tools.
Play the original, the vocal, and the instrumental back to back
After Isolate vocal, use Load Original, Load Isolated, and Load Instrumental to switch versions in the header player at the same timestamp. The isolated file stays on this page until you press Save Vocal as Take, choose a slot, and name it. The pitch roadmap shows the original trace in gray and the isolated trace in teal. Click the chart to move the playhead.
Download the isolated file without leaving the browser
After processing, use Download Isolated in the action row after Process again: pick Format (MP3, WAV, OGG, M4A), then download. Filenames use the take’s recording time, e.g. isolated_2025-10-03_14-30-00.wav. Or press Save Vocal as Take, pick slot A–D, and export that slot from the Controller download menu — same local encode, no upload.
Remove the vocal: get the instrumental and sing over it
Separate vocal from mix also keeps what the vocal was taken out of: the original minus the isolated vocal, in stereo. Download Instrumental saves it in the format you picked, e.g. instrumental_2025-10-03_14-30-00.mp3. Use Instrumental as backing loads it into Takes and backing in the Controller, so you can play it or record a new take over it with the pitch monitor running. Vocal the model missed — reverb tails, doubled lines, very high sibilance — stays in the instrumental.
Chain with Auto-Tune when you need both
Each tool processes the take you load in the Controller, not a hidden copy tied to another slot. Fastest path: Save Vocal as Take after isolation, select that slot, open Auto-Tune, and Apply. You can also download the isolated file (WAV keeps the most detail), upload it as a new take, and run the second tool — same idea as chaining files in a DAW, but entirely in the tab.
How to use it
Record a take in the Controller strip in the header, or upload a file (up to 10 minutes / 50 MB). Choose Separate vocal from mix for a song with backing music, or Reduce room noise for a voice-only take. Optionally pick the vocal range, then press the button. The time estimate shows before you start; the progress bar shows the real work done.
Vocal range (optional)
- Pick the range of the singer in this file. It may not be your own range — for a commercial song it is the original singer’s.
- The range does not make processing faster. It narrows the pitch trace to those notes (±2 semitones) and removes rumble below the lowest note, which cuts false pitches from bass left in the mix.
- Auto estimates the range from the result and shows it as Detected range. If too few sung notes are found, no range filter is applied.
- Change the range after processing and press Apply new range: only the range filter and the pitch trace run again, not the model. After a reload, Process again is needed.
- If most of the vocal sits outside the chosen range, the result card warns and offers Switch to Auto.
After processing
- Pitch roadmap — gray is the original pitch, teal is the pitch measured on the isolated file. Click the chart to move the playhead. Gaps are unvoiced sections (consonants, breath).
- Load Original / Load Isolated / Load Instrumental — pushes that version into the Controller player so you can compare them at the same timestamp. Load Instrumental appears after Separate vocal from mix; the pitch chart keeps the original trace while it plays.
- Process again — change mode, vocal range, or room-noise sample and run again. Always starts from the original audio; passes do not stack.
- Download Isolated — appears in the action row after Isolate vocal: choose MP3, WAV, OGG, or M4A. Saves locally; filename uses the take recording timestamp (
isolated_YYYY-MM-DD_HH-MM-SS.ext). - Download Instrumental — Separate vocal from mix only: everything except the vocal, in stereo, in the same formats (
instrumental_YYYY-MM-DD_HH-MM-SS.ext). - Save Vocal as Take — stores the isolated audio in a slot A–D with a name you choose. It does not replace the dry or mixed recording in another slot unless you overwrite that slot on purpose.
- Use Instrumental as backing — replaces the backing track in Takes and backing with the instrumental. Turn on mix or into-take there as usual.
- Controller export — after Save Vocal as Take, open Download in the header, pick that slot, and choose MP3, WAV, OGG, or M4A.
Reading the result card
- Vocal level — loudness of the isolated file against the original, in dB.
- Removed energy — loudness of what was taken away (original minus isolated), in dB.
- Noise floor change — in Reduce room noise, how much quieter the noise sample got.
- Good for pitch practice means the estimated gap-to-voice level passed the app’s −20 dB warning line; it does not guarantee accurate pitch detection. If there are fewer than ten voiced or gap samples, the app says not enough voiced/gap samples — listen and check the pitch trace. Backing still audible indicates estimated leakage above the warning line. Always listen to the result. A mono mix may separate less cleanly.
What people actually use the two modes for
- Singers practicing intonation on a favorite song without buying stem software.
- Singers who want a karaoke-style instrumental to sing or record over, with the pitch monitor running.
- Home recordists cleaning up hiss or hum on a dry vocal before sharing a demo.
- Students comparing pitch traces on an isolated estimate against the full mix.
Limits
- Clips shorter than 3 seconds are too short to separate.
- On phones the model runs on one worker and is slower; if the browser runs out of memory, noise reduction may still work.
- Lead and backing vocals are not split from each other.
Credits
Separation model: KUIELab-MDX-Net (Leaderboard B vocals) by Minseok Kim, Woosung Choi, Jaehwa Chung, Daewon Lee, and Soonyoung Jung (2021), Zenodo, doi:10.5281/zenodo.6513062. Weights under CC BY 4.0, code under the MIT license. Runs with ONNX Runtime Web.
Recordings this page is meant for
- Your own voice-only take with a fan or hiss: Reduce room noise, then open that file on the pitch monitor.
- A mix you are allowed to edit, such as a session stem or a track you recorded: Separate vocal from mix, then read the vocal on the pitch monitor.
- Use Instrumental as backing only for audio you have the right to reuse. This page does not supply songs, and it does not clear someone else's copyright.
Which source fits which mode
The two modes expect different kinds of audio, which usually decides whether you record or upload. Reduce room noise is for your own voice: record live into the Controller, or upload a dry take you made elsewhere, then separately capture a one-second room-tone sample for the noise profile. Separate vocal from mix is for a finished song with instruments already in it — that is almost always an upload (a track you have the right to edit), since recording live into this page would just capture your microphone picking up room noise and whatever is playing nearby, not a clean mixed file.
One exception worth knowing: if you want to check how well a mix separates before committing to it, upload a short clip first — the model runs on whatever length you give it, so a 20-second excerpt tests the result in a fraction of the time a full song takes.
Two different engines under one button
Separate vocal from mix runs a pre-trained MDX-Net model through ONNX Runtime Web, entirely in the tab. It processes the file in short overlapping segments and outputs a vocal estimate aligned sample-for-sample with the input, which is why the instrumental is just original-minus-vocal rather than a second inference pass. Separation quality tracks how the source was mixed: heavy reverb, doubling, or a vocal buried under dense instrumentation gives the model less clean signal to work from, which is why traces of it can remain in the instrumental.
Reduce room noise is a different, much simpler pipeline with no neural model: it takes an FFT over a one-second sample of quiet room tone, subtracts that noise spectrum from the rest of the file frame by frame, applies a high-pass filter around 80 Hz, and runs a downward expander to clean up what spectral subtraction leaves behind. It only removes steady, hum-like noise — it has nothing that recognizes or removes music.
Questions
Does this upload my audio?
No. The model file is fetched once from this site and cached in the browser. Separation and noise reduction both run against audio already in the tab — nothing is sent anywhere while processing.
Is this the same quality as iZotope RX or a paid stem service?
No. This is one free model running in a browser tab, not a mastering suite. Dense, heavily reverbed mixes still leak drums or reverb tails into the vocal. Treat the output as a practice estimate, not a release-ready stem.
What is the actual difference between the two modes?
Separate vocal from mix runs a trained model to pull a lead vocal out of a full mix with drums and chords. Reduce room noise runs no model at all — it subtracts a noise profile sampled from one second of your own quiet room tone, which only works on a take that is already voice-only.
Can it give me an instrumental too?
Yes, but only from Separate vocal from mix. The instrumental is the original audio minus the isolated vocal, computed per sample — not a second model run. Load Instrumental, Download Instrumental, and Use Instrumental as backing all come from that same subtraction.
Why does the instrumental disappear after a reload but the vocal does not?
The isolated vocal uses the same last-save expiry check on restore as its take. The instrumental is a full-length stereo file and is kept only until you leave or reload the page — download it or send it to backing if you want to keep it, otherwise Process again rebuilds it from the original.
Does picking a vocal range make it faster?
No. The range only narrows the pitch trace drawn afterward and removes rumble below the lowest expected note — it does not change what the separation model does or how long it takes.
How long does a song actually take?
A rough estimate shows before you press the button. On a desktop a 3-minute file is usually one to two minutes once the model is cached; the very first run on a device also downloads that model, about 30 MB.
Can I run Auto-Tune on the isolated vocal?
Yes. Save Vocal as Take puts it in a slot, then open Auto-Tune and load that slot. Each tool only ever processes the take you load into it — there is no hidden link back to the original mix.
How does a model separate vocal from instruments without being told what either one sounds like?
It was trained beforehand on many songs where the clean vocal and instrumental were already known separately, so it learned the general spectral and timing patterns that tend to distinguish a lead vocal from drums, bass, and chords. On your file it is applying that learned pattern, not analyzing this specific song's structure from scratch.
What happens if the model fails to download or the separation errors out?
The page shows a specific reason instead of a generic failure: a stalled connection reports that the model could not be downloaded and asks you to check your connection, a corrupted download is re-fetched automatically on the next try, and running low on memory suggests closing other tabs. Reduce room noise does not need the model, so it can still work when Separate vocal from mix cannot.
